Item Description
Merchandise Description
Zhang Sheng delivers our newly developed exceptional up to 8.7 inches (22 cm) PTO driven wooden chipper with automated hydraulic feed. The wood chipper is developed to supply landowners with an cost-effective and nicely-created wooden chipper. This is a extremely potent wood chipper aiming to be the ideal worth wooden chipper in its course.
Merchandise Rewards
Hydraulic feed program
The feed push roller is driven by an innovative hydraulic motor. The route and velocity can be adjusted to deal with branches of all designs and sizes simply.
Reliable rotor
The rotor is processed by CNC lathe and undergoes rigid dynamic equilibrium inspection to make sure stable serving. Large admirer on the back again with a speed of in excess of 540RPM, which can effortlessly discharge the wooden chips.
Blades
The chipper makes use of 4 higher-energy manganese metal blades, spaced 90° aside. Blades can be changed quite speedily many thanks to the clamshell rotor housing design and style.
Inlet
With the huge inlet, it can simply process a lot of branches, lowering handbook pruning perform.
Discharge chute
The discharge chute is made to rotate 360°, which helps make it much more versatile irrespective of the discharge course of the chipper. Outfitted with a rotating deflector at the stop of the discharge chute, it can control the position the place the wood chips are ejected.
Contains a PTO shaft with shear pins.
Product Parameters
Design |
ZSPS42S |
ZSPS42R |
ZSPS62R |
ZSPS92R |
Flywheel diameter |
630mm |
630mm |
740mm |
940mm |
Flywheel thickness |
18mm |
18mm |
25mm |
35mm |
Flywheel fat |
50kg |
50kg |
80kg |
170kg |
NO. of blade |
four |
4 |
four |
4 |
blades materials |
65mn |
65mn |
65mn |
Cr12 |
blades measurement |
210*sixty*9mm |
210*sixty*9mm |
240*60*10mm |
320*one hundred*16mm |
feed hopper dimension |
500*500mm |
500*500mm |
580*580mm |
620*620mm |
exit dimension |
100mm |
100mm |
150mm |
220mm |
package dimensions |
1140*910*1260 |
1140*910*1260 |
1200*1100*2100 |
1300*1150*2150 |
bundle bodyweight |
225kg |
340kg |
538kg |
655kg |
energy necessary |
35-sixty |
35-sixty |
sixty-80 |
seventy five-a hundred |
Packaging & Transport
Packed in large high quality steel frame, with board on the bottom for assistance andextra plastic wrap for safety. Make sure that the equipment is delivered to you intact and with out damage, and begin creation immediately.
Case show
Our items are exported to Europe and other nations around the world,and have received praise from numerous sellers and end users.
Company Profile
Recognized in 2005,ZheJiang Zhangsheng Environmental ProtectionEquipment Company is headquartered in HangZhou Metropolis, ZheJiang Province.The company is in the listing of the “Honesty Organization in ZheJiang Province”,and obtained the two ISO and CE certification.The productshave been extensively exported to more than sixty countries and get a good deal of praise from buyers.Our primary products are wooden chipper shredder, wood crushers, horizontal grinder, tub grinder, wooden shredders, wooden shaving machine, wood flour generating mahcine, wooden peeling equipment, wooden pellet line, log trailer with grapple, log spliter, bandsaw mill, and so forth.
3 sets of higher-energy laser chopping devices can fulfill the content preparation operate of 1,000 sets for each thirty day period.
5 imported CNC lathes, with rapidly processing speed and large precision of workpieces.
Five dynamic balancing equipment make sure that the rotors of each crusher are precisely calibrated.
Has an assembly workshop of 5,000 square meters Meet the month-to-month generation activity of 1,000 units.
After-sales Service: | Technical Online Support |
---|---|
Warranty: | 1 Years |
Type: | Wood Chipper |
Power Source: | Diesel |
Certification: | ISO9001, CE, CCC, EPA |
Product Name: | Pto Wood Chipper Hydraulic Feed |
###
Samples: |
US$ 2600/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Model
|
ZSPS42S
|
ZSPS42R
|
ZSPS62R
|
ZSPS92R
|
Flywheel diameter
|
630mm
|
630mm
|
740mm
|
940mm
|
Flywheel thickness
|
18mm
|
18mm
|
25mm
|
35mm
|
Flywheel weight
|
50kg
|
50kg
|
80kg
|
170kg
|
NO. of blade
|
4
|
4
|
4
|
4
|
blades material
|
65mn
|
65mn
|
65mn
|
Cr12
|
blades size
|
210*60*9mm
|
210*60*9mm
|
240*60*10mm
|
320*100*16mm
|
feed hopper size
|
500*500mm
|
500*500mm
|
580*580mm
|
620*620mm
|
exit size
|
100mm
|
100mm
|
150mm
|
220mm
|
package size
|
1140*910*1260
|
1140*910*1260
|
1200*1100*2100
|
1300*1150*2150
|
package weight
|
225kg
|
340kg
|
538kg
|
655kg
|
power required
|
35-60
|
35-60
|
60-80
|
75-100
|
After-sales Service: | Technical Online Support |
---|---|
Warranty: | 1 Years |
Type: | Wood Chipper |
Power Source: | Diesel |
Certification: | ISO9001, CE, CCC, EPA |
Product Name: | Pto Wood Chipper Hydraulic Feed |
###
Samples: |
US$ 2600/Piece
1 Piece(Min.Order) |
---|
###
Customization: |
Available
|
---|
###
Model
|
ZSPS42S
|
ZSPS42R
|
ZSPS62R
|
ZSPS92R
|
Flywheel diameter
|
630mm
|
630mm
|
740mm
|
940mm
|
Flywheel thickness
|
18mm
|
18mm
|
25mm
|
35mm
|
Flywheel weight
|
50kg
|
50kg
|
80kg
|
170kg
|
NO. of blade
|
4
|
4
|
4
|
4
|
blades material
|
65mn
|
65mn
|
65mn
|
Cr12
|
blades size
|
210*60*9mm
|
210*60*9mm
|
240*60*10mm
|
320*100*16mm
|
feed hopper size
|
500*500mm
|
500*500mm
|
580*580mm
|
620*620mm
|
exit size
|
100mm
|
100mm
|
150mm
|
220mm
|
package size
|
1140*910*1260
|
1140*910*1260
|
1200*1100*2100
|
1300*1150*2150
|
package weight
|
225kg
|
340kg
|
538kg
|
655kg
|
power required
|
35-60
|
35-60
|
60-80
|
75-100
|
PTO Shafts and PTO Shaft Shields
When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.
540 rpm
A 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.
Safety chains
Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.
Shield
The PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.
Reverse rotation
The PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
editor by czh 2023-01-03